PARTS OF A SHIP
Nov 07, 2025



Front (Bow) Area

Bulbous Bow
A rounded projection located below the waterline at the forward part of the hull. It reduces wave resistance and helps improve the ship’s fuel efficiency and stability.

Bow
The forward-most section of the ship designed to cut through the water as the vessel moves.

Stem
The vertical front edge of the bow that forms the main support where the two sides of the hull meet.

Foredeck
The deck area located at the forward part of the ship, often used for anchor handling and mooring operations.

Fore Mast
A mast positioned near the bow used to mount lights, radar, antennas, and other navigational instruments.

Hatch Cover
A watertight cover placed over cargo holds to protect the cargo from seawater and weather exposure.

Deck
The main working platform of the ship where crew activities and operations take place.

Hull
The main outer structure or body of the ship that provides buoyancy and keeps the vessel afloat.

Anchor
A heavy device lowered to the seabed to hold the ship in position and prevent drifting.

Bridge
The command center of the ship where navigation, control, and monitoring of vessel movement and operations are performed.

Midship and Superstructure

Superstructure
The portion of the ship constructed above the main deck, housing key operational and living spaces.

Accommodation
The area where the crew lives and works. It includes cabins, mess rooms, offices, and other essential living facilities.

Flying Bridge / Bridge Wings
Side platforms extending from the bridge used for maneuvering and observation, especially during docking and unmooring.

Monkey Island
An open platform located above the bridge that provides access to radar, communication, and navigation equipment, as well as offering an unobstructed view of the surroundings.

Main Mast
The primary mast supporting communication systems, navigation lights, and other electronic devices.

ADVERTISEMENT

Rear (Stern) Area

Funnel
A vertical structure that releases exhaust gases from the main and auxiliary engines. It is also used to house ventilation ducts and pipes.

Funnel Deck
The deck area where the funnel is installed, typically located behind or above the engine room.

Lifeboat
A self-contained emergency vessel used for crew evacuation in case of emergency situations.

Poop Deck
A raised deck located at the stern, providing structural cover to the accommodation below and a vantage point for lookout or limited operations.

Stern
The rear-most part of the ship that houses the propulsion system and impacts steering and stability.

Engine Room
The machinery space containing the main engine, generators, pumps, and other vital mechanical equipment responsible for propulsion and power generation.

Keel
The structural backbone of the ship located at the bottom of the hull running from bow to stern, providing strength and stability to the ship’s framework.

Propeller
A rotating device at the stern driven by the main engine to push water backwards, propelling the ship forward.

RELATED EDUCATIONAL VIEW MORE...

MARPOL 73/78 CONVENTION: LATEST UPDATES

The International Convention for the Prevention of Pollution from Ships, 1973, as modified by the Protocol of 1978, more commonly referred to as MARPOL 73/78, is the primary international agreement developed by the International Maritime Organization to prevent pollution of the marine environment from ships. Adopted in response to growing concern over oil spills and vessel discharges in the 1970s, it has since evolved into a comprehensive framework that addresses multiple forms of ship-source pollution. Together with SOLAS, MARPOL is regarded as one of the twin pillars of international maritime law, protecting both human life and the natural environment. MARPOL applies to all ships, though its requirements vary depending on size, type, and operation. Compliance is ensured through certification by flag states, enforcement by port state control, and the application of special provisions for designated “special areas” and “emission control areas” where stricter rules apply. Over the years, the Convention has grown through six technical annexes, each dedicated to a specific category of pollution. These annexes are the foundation of MARPOL and remain central to its implementation. Annex I addresses the prevention of pollution by oil. It includes requirements for double-hulled oil tankers, oil discharge monitoring and control systems, oily water separators, and record books. It is one of the most detailed annexes, reflecting the seriousness of oil pollution incidents. Annex II concerns the control of pollution by noxious liquid substances carried in bulk. It establishes categories for chemicals, prewash procedures, and restrictions on discharges, requiring chemical tankers to operate under strict safety and environmental standards. Annex III regulates the prevention of pollution by harmful substances carried by sea in packaged form. It is closely linked to the International Maritime Dangerous Goods (IMDG) Code, ensuring labeling, packaging, and documentation are standardized. Annex IV covers the prevention of pollution by sewage from ships. It requires ships to install approved sewage treatment plants or holding systems and regulates discharges into the sea, particularly in designated sensitive areas. Annex V deals with the prevention of pollution by garbage from ships. It prohibits the discharge of plastics, restricts the disposal of other wastes, and requires vessels to maintain garbage management plans and record books. This annex has been strengthened repeatedly to reflect the global urgency of reducing marine litter. Annex VI addresses the prevention of air pollution from ships. It limits emissions of sulfur oxides (SOx) and nitrogen oxides (NOx), regulates fuel oil quality, prohibits ozone-depleting substances, and introduces greenhouse gas reduction measures such as the Energy Efficiency Design Index (EEDI), Ship Energy Efficiency Management Plan (SEEMP), and the Carbon Intensity Indicator (CII). It also establishes Emission Control Areas where more stringent standards apply. Recent amendments highlight MARPOL’s responsiveness to modern environmental challenges. In 2024, Annex I was updated to require improved oil discharge monitoring equipment, while Annex II introduced expanded prewash obligations in the Baltic and North Sea to reduce chemical residues. Annex IV tightened sewage effluent standards, and Annex V expanded garbage management requirements to smaller ships and reinforced prohibitions on plastics. Annex VI amendments in 2024 introduced stricter nitrogen oxide limits for new engines and strengthened rules for ships using alternative fuels, ensuring adequate fire protection and fuel distribution systems in parallel with the IGF Code. By 2025, MARPOL continues to advance global decarbonization and environmental protection objectives. Annex VI now mandates enhanced monitoring and verification of the Carbon Intensity Indicator, requiring ships to achieve satisfactory efficiency ratings or adopt corrective action plans. This step places greater responsibility on shipping companies to reduce operational emissions. Electronic record books for oil, garbage, and cargo handling operations are increasingly being accepted in place of paper logs, reflecting the shift toward digital compliance and reducing administrative burdens. New reporting obligations for lost containers at sea, coordinated with parallel SOLAS amendments, will also apply from 2026, ensuring faster notification to authorities and minimizing environmental and navigational hazards. Annex III, through updates aligned with the IMDG Code, further enhances labeling and documentation for harmful substances in packaged form. These updates underline MARPOL’s role as a living instrument that evolves in response to both long-standing pollution risks and emerging challenges such as climate change, marine litter, and the transition to alternative fuels. The integration of greenhouse gas measures under Annex VI,

Maritime Zones Explained: The Boundaries of Our Seas

The concept of maritime zones is a cornerstone of international maritime law, defined primarily by the United Nations Convention on the Law of the Sea (UNCLOS). These zones determine the extent of a coastal state’s rights, responsibilities, and jurisdiction over the waters and resources adjacent to its shores. Background • Maritime zones were established to resolve disputes over navigation, resource ownership, and national security. • Boundaries are measured from a country’s baseline (usually the low-water mark along the coast). • The key zones include: • Internal Waters – full sovereignty like land territory. • Territorial Sea – up to 12 nautical miles. • Contiguous Zone – up to 24 nautical miles. • Exclusive Economic Zone (EEZ) – up to 200 nautical miles. • Continental Shelf – may extend beyond 200 nautical miles depending on natural features. Purpose • Internal Waters – treated like land territory, full state control. • Territorial Sea (12 nm) – authority over navigation, resources, and law enforcement. • Contiguous Zone (24 nm) – enforcement against smuggling, illegal entry, and security threats. • Exclusive Economic Zone (200 nm) – exclusive rights to explore and exploit resources (fish, oil, gas). • Continental Shelf – rights over seabed resources even beyond EEZ. Importance • Safeguards national security and territorial sovereignty. • Ensures sustainable use of marine resources (fisheries, oil, gas). • Provides control over shipping routes and trade lifelines. • Strengthens sovereignty in disputed waters (vital for nations like the Philippines). • Globally, reduces conflict, promotes order and cooperation, and protects the marine environment.

4- Stroke Engine

The Four-Stroke Engine The four-stroke engine is one of the most important innovations in mechanical and marine engineering. Known for its reliability and efficiency, this internal-combustion engine powers ships, vehicles, and generators across the world. Each cycle of this engine goes through four distinct strokes — intake, compression, power, and exhaust — that convert fuel into mechanical energy efficiently and cleanly. A Brief History The concept of the four-stroke cycle was first proposed in 1862 by French engineer Alphonse Beau de Rochas, who described how an engine could work more efficiently by separating the intake, compression, power, and exhaust processes. This theory was brought to life in 1876 by German engineer Nikolaus August Otto, whose engine design became known as the “Otto Cycle.” His invention marked the foundation of modern engines, influencing both automotive and marine propulsion systems.

IMMERSION SUIT: Essential Survival Gear for Every Seafarer

An immersion suit also called a survival suit is a life-saving garment designed to keep seafarers protected in the event of abandoning ship, especially in cold waters. Made of insulated, waterproof material, it drastically slows body heat loss and increases chances of rescue. Purpose • Thermal Protection: Retains body heat to prevent hypothermia. • Buoyancy: Keeps the wearer afloat without the need to swim. • Visibility: High-visibility color and reflective tape help rescuers locate survivors quickly. • Survivability: Protects against wind, waves, and freezing temperatures while awaiting rescue.

MARINO PH - The largest maritime community.
9_20250904_175149_0008.png
10_20250904_175149_0009.png
12_20250904_175150_0011.png
19_20250904_175150_0018.png
20_20250904_175150_0019.png
23_20250904_175150_0022.png
26_20250904_175150_0025.png
32_20250904_175150_0031.png
5_20250904_175149_0004.png
6_20250904_175149_0005.png
8_20250904_175149_0007.png
11_20250904_175149_0010.png
13_20250904_175150_0012.png
14_20250904_175150_0013.png
15_20250904_175150_0014.png
16_20250904_175150_0015.png
17_20250904_175150_0016.png
18_20250904_175150_0017.png
21_20250904_175150_0020.png
22_20250904_175150_0021.png
24_20250904_175150_0023.png
25_20250904_175150_0024.png
27_20250904_175150_0026.png
28_20250904_175150_0027.png
29_20250904_175150_0028.png
30_20250904_175150_0029.png
31_20250904_175150_0030.png
33_20250904_175150_0032.png

Marino PH Logo

MARINO PH

The largest maritime community in the Philippines
© 2025 All Rights Reserved.


CONTACT INFORMATION

+63 (02) 8743 5810
customercare@marinoph.com
Agoncillo Building, 1580 Taft Ave, Ermita, Manila City, 1000 Metro Manila